$67.66
Add to Cart
GM CD6 drive mechanism. 04+ Delco Delphi radio. OEM factory original mech.6CD CD
ReplacementRadios, one of the largest factory audio/video websites, has branched out!! If you’ve been to our site, you know we have a HUGE selection of OEM radios and compatible accessories. Now we’re offering a few select products here too. Same great ReplacementRadios quality.....in a new location.
SUMMARY
BRAND NEW Factory (OEM) GM Delco CD6 drive
Manufactured by Panasonic for Delco
Installation instructions are NOT included
-But basic ones appear below
Looks like the drive pictured
Has the double 'kidney' openings above CD trays
-Yours must have those opening as well
-If yours is a single triangle, this is NOT compatible
A GREAT way to replace a drive with problems like:
-CD playback issues or errors
-CD load issues or errors
-CD eject issues or errors
Compatible with the AM/FM/CD6 radio
-Not the remote 6 CD changer
--Remote means separate from the radio
Compatible with BOSE or non-BOSE CD6 radios
Not compatible with navigation radios
Not compatible with single CD or CD/Cass radios
Not compatible with MP3 radios
Is not DVD capable
Plays standard audio format CDs and CDRs
Will NOT trigger the THEFTLOCK system
-Plug your radio back in and go.
Has NEVER been in a vehicle!!
Will require removal of radio from vehicle
-Do not attempt with radio connected
Plug and play
-No soldering or splicing required
-Just a few screws and one or two cables
-See the Removal/Installation Instructions section below
--It also has trouble-shooting info
Board number is E-9060A-1, E9060A-2, or equivalent
-A few other numbers are interchangeable
--E9291-1
--E9291-2
--E-9291-1
--E-9291-2
--E9060A-1
--E9060A-2
--E9482A-1
--E9482A-2
--9482A
--E9291A
--9291A
-Follow instructions below to determine if yours is
--If yours isn't one of the above
--Found in the DETAILS section
Your drive must have double 'kidney' openings
-Not a single triangle
Some drives require a secondary board swap
-No soldering required
-See info in DETAILS below
Has the 14-pin connector
-Doesn't make it right for every 14-pin application
-See DETAILS section for info
6 month warranty
DETAILS
This is a brand new 6 disc CD drive for select Delco radios found in Chevrolet/GMC/Cadillac midsize or fullsize trucks, SUVs and vans starting in 2004. (Plus a few cars. See either the Compatibility or APPLICATIONS section of this ad.) Even though it looks like the drive used in other applications (Ford, Nissan, Toyota, Audi, Hyundai, Honda, etc), this is the GM version and it's not usually interchangeable. It may look like the drive used in Cadillac cars but we have not confirmed fitment in anything not listed, so you are buying at your own risk if you do not have a vehicle that's listed. There is a 6 month replacement warranty on this item. It covers functional defects only.
Instructions for matching to your drive:
You will need to pop the top case off your radio to verify yours has this drive because some radios were offered with a different, incompatible drive. Especially in the 2004 model year. If yours doesn't look virtually identical to the one pictured, it won't work for you. The most important thing to look for is the openings above the CD trays. If there are two 'kidney' shaped openings, you can use this. If yours only has one triangular shaped opening, you cannot use this. Please note: If your 'double kidney' drive has a green circuit board on top, you will have to swap the green board (and the bracket holding it in place) from your drive to this one. (No soldering required. It's a couple screws, a couple bendable tabs and a cable. Easy peasy.) Sometimes your green board is bad and requires replacement. It is rare, but it happens. Sometimes the package gets jolted hard, in just the wrong manner, and something gets bounced out of place in the drive. (You will notice there are a lot of spring-loaded parts in it.) If you have difficulties after install, please email us before jumping to conclusions that we sent the wrong thing, a used drive, etc. You can see from both the sales history in this ad AND our feedback, that's not how we operate. Also see the Removal/Installation Instructions section below, for some special install considerations.
APPLICATIONS
Please see the notes for each application. The most important thing is that your drive has the double 'kidney' openings above the CD trays. A few vehicles on the list were offered with different drives. And a few very late 2003 vehicles may have had this drive so, if your 2003 drive matches the requirements listed in the previous section, you can use it too. ** Make sure to follow the instructions in the Instructions for matching to your drive section and confirm this is the drive you have BEFORE ordering.In very rare instances, you may find that replacing the drive does not solve your problem. Replacement of your radio might be your only option. Please be aware we have no control over this. Nor do we have any way of predicting when this is going to happen. Here is a list of possible applications:
-Buick LaCrosse: 2005-2007
-Buick Rainier: 2005-2007
-Cadillac Escalade (including EXT): 2004-2006
-Chevrolet Avalanche: 2004-2006
-Chevrolet Colorado: 2004-2012
-Chevrolet Silverado: 2004-2006
-Chevrolet Silverado Classic: 2007
-Chevrolet SSR: 2004-2006
-Chevrolet Suburban: 2004-2006
-Chevrolet Tahoe: 2004-2006
-Chevrolet Trailblazer: 2005-2006
-Chevrolet Express Van: 2005-2007
-GMC Canyon: 2004-2012
-GMC Envoy: 2005-2009
-GMC Sierra: 2004-2006
-GMC Sierra Classic: 2007
-GMC Savana Van: 2005-2007
-GMC Yukon (including Denali and XL): 2004-2006
-Hummer H2: 2004-2007
-Isuzu Ascender: 2005-2007
Removal/Installation Instructions Instructions are not included but installation is relatively easy and basic guidelines appear here. However, if you're not mechanically inclined, you shouldn't be buying it. You start by disconnecting the radio from the vehicle harness and letting it sit for at least 30 minutes. You remove the face by working your way around it, prying it off at the tab locations. Then you remove two 3/16 hex screws holding the drive in from the front and two more from the rear. The drive can then be lifted out (carefully) and the ribbon cable pulled free of it. If there is a bracket attached to the back of your drive, it will need swapped to the new one. Make sure you put the screws back in the same holes as before and do not over-tighten them. They are sized differently, even if it isn't obvious by looking. Sometimes customers have problems with the drive continually cycling after install and saying INITIALIZING on the display. This is usually a result of the wrong screw being placed in the hole directly behind the volume/power knob. If you have this problem and you think you've put the screws in the right hole, remove that screw altogether and see if it works then. If it does, you can file the end of the screw down to make it shorter and re-insert it. (Or you can just leave it out. We do not recommend leaving it out but several customers have done so and have not reported any repercussions.) Do not attempt this repair with the radio still plugged in! Unplug it and let it sit for at least 30 minutes.
ABOUT US:
We are NOT a salvage yard. We are NOT affiliated with a salvage yard. We don't have the typical auto parts mentality. We specialize in one thing: factory audio/video. We are very picky and strive to provide items we would be proud to have in our own vehicles. When you buy an item from us, it is guaranteed to work. Occasionally problems arise with electronics. However, please be assured we never knowingly send out a defective item. It is not in our best interest to send out defective items because we waste time and money replacing them under our warranty. We aim to keep our returns low and our customer satisfaction high. Please give us a chance to add you to our long list of satisfied customers.
SHIPPING & HANDLING
Shipping cost is based on weight and zip code. This site does the figuring, not us. If you feel their calculation is high, you might be underestimating the package weight and/or current shipping costs from our zip code (62401) to yours. Please don't ding us for shipping in the ratings, as we have no control over ever-increasing carrier rates.
We will enter a tracking number into your order details here on the site. They will email it to you if your notification preferences are set correctly.
A signature is not typically required. If you are not home to receive the package, it will most likely be left at your door. Please monitor it's progress and arrange to collect it when it arrives.
This site provides a section/tab in each ad for Shipping information. We encourage you to check that section for prices, methods, time-frames, etc.
SUMMARY
BRAND NEW Factory (OEM) GM Delco CD6 drive
Manufactured by Panasonic for Delco
Installation instructions are NOT included
-But basic ones appear below
Looks like the drive pictured
Has the double 'kidney' openings above CD trays
-Yours must have those opening as well
-If yours is a single triangle, this is NOT compatible
A GREAT way to replace a drive with problems like:
-CD playback issues or errors
-CD load issues or errors
-CD eject issues or errors
Compatible with the AM/FM/CD6 radio
-Not the remote 6 CD changer
--Remote means separate from the radio
Compatible with BOSE or non-BOSE CD6 radios
Not compatible with navigation radios
Not compatible with single CD or CD/Cass radios
Not compatible with MP3 radios
Is not DVD capable
Plays standard audio format CDs and CDRs
Will NOT trigger the THEFTLOCK system
-Plug your radio back in and go.
Has NEVER been in a vehicle!!
Will require removal of radio from vehicle
-Do not attempt with radio connected
Plug and play
-No soldering or splicing required
-Just a few screws and one or two cables
-See the Removal/Installation Instructions section below
--It also has trouble-shooting info
Board number is E-9060A-1, E9060A-2, or equivalent
-A few other numbers are interchangeable
--E9291-1
--E9291-2
--E-9291-1
--E-9291-2
--E9060A-1
--E9060A-2
--E9482A-1
--E9482A-2
--9482A
--E9291A
--9291A
-Follow instructions below to determine if yours is
--If yours isn't one of the above
--Found in the DETAILS section
Your drive must have double 'kidney' openings
-Not a single triangle
Some drives require a secondary board swap
-No soldering required
-See info in DETAILS below
Has the 14-pin connector
-Doesn't make it right for every 14-pin application
-See DETAILS section for info
6 month warranty
DETAILS
This is a brand new 6 disc CD drive for select Delco radios found in Chevrolet/GMC/Cadillac midsize or fullsize trucks, SUVs and vans starting in 2004. (Plus a few cars. See either the Compatibility or APPLICATIONS section of this ad.) Even though it looks like the drive used in other applications (Ford, Nissan, Toyota, Audi, Hyundai, Honda, etc), this is the GM version and it's not usually interchangeable. It may look like the drive used in Cadillac cars but we have not confirmed fitment in anything not listed, so you are buying at your own risk if you do not have a vehicle that's listed. There is a 6 month replacement warranty on this item. It covers functional defects only.
Instructions for matching to your drive:
You will need to pop the top case off your radio to verify yours has this drive because some radios were offered with a different, incompatible drive. Especially in the 2004 model year. If yours doesn't look virtually identical to the one pictured, it won't work for you. The most important thing to look for is the openings above the CD trays. If there are two 'kidney' shaped openings, you can use this. If yours only has one triangular shaped opening, you cannot use this. Please note: If your 'double kidney' drive has a green circuit board on top, you will have to swap the green board (and the bracket holding it in place) from your drive to this one. (No soldering required. It's a couple screws, a couple bendable tabs and a cable. Easy peasy.) Sometimes your green board is bad and requires replacement. It is rare, but it happens. Sometimes the package gets jolted hard, in just the wrong manner, and something gets bounced out of place in the drive. (You will notice there are a lot of spring-loaded parts in it.) If you have difficulties after install, please email us before jumping to conclusions that we sent the wrong thing, a used drive, etc. You can see from both the sales history in this ad AND our feedback, that's not how we operate. Also see the Removal/Installation Instructions section below, for some special install considerations.
APPLICATIONS
Please see the notes for each application. The most important thing is that your drive has the double 'kidney' openings above the CD trays. A few vehicles on the list were offered with different drives. And a few very late 2003 vehicles may have had this drive so, if your 2003 drive matches the requirements listed in the previous section, you can use it too. ** Make sure to follow the instructions in the Instructions for matching to your drive section and confirm this is the drive you have BEFORE ordering.In very rare instances, you may find that replacing the drive does not solve your problem. Replacement of your radio might be your only option. Please be aware we have no control over this. Nor do we have any way of predicting when this is going to happen. Here is a list of possible applications:
-Buick LaCrosse: 2005-2007
-Buick Rainier: 2005-2007
-Cadillac Escalade (including EXT): 2004-2006
-Chevrolet Avalanche: 2004-2006
-Chevrolet Colorado: 2004-2012
-Chevrolet Silverado: 2004-2006
-Chevrolet Silverado Classic: 2007
-Chevrolet SSR: 2004-2006
-Chevrolet Suburban: 2004-2006
-Chevrolet Tahoe: 2004-2006
-Chevrolet Trailblazer: 2005-2006
-Chevrolet Express Van: 2005-2007
-GMC Canyon: 2004-2012
-GMC Envoy: 2005-2009
-GMC Sierra: 2004-2006
-GMC Sierra Classic: 2007
-GMC Savana Van: 2005-2007
-GMC Yukon (including Denali and XL): 2004-2006
-Hummer H2: 2004-2007
-Isuzu Ascender: 2005-2007
Removal/Installation Instructions Instructions are not included but installation is relatively easy and basic guidelines appear here. However, if you're not mechanically inclined, you shouldn't be buying it. You start by disconnecting the radio from the vehicle harness and letting it sit for at least 30 minutes. You remove the face by working your way around it, prying it off at the tab locations. Then you remove two 3/16 hex screws holding the drive in from the front and two more from the rear. The drive can then be lifted out (carefully) and the ribbon cable pulled free of it. If there is a bracket attached to the back of your drive, it will need swapped to the new one. Make sure you put the screws back in the same holes as before and do not over-tighten them. They are sized differently, even if it isn't obvious by looking. Sometimes customers have problems with the drive continually cycling after install and saying INITIALIZING on the display. This is usually a result of the wrong screw being placed in the hole directly behind the volume/power knob. If you have this problem and you think you've put the screws in the right hole, remove that screw altogether and see if it works then. If it does, you can file the end of the screw down to make it shorter and re-insert it. (Or you can just leave it out. We do not recommend leaving it out but several customers have done so and have not reported any repercussions.) Do not attempt this repair with the radio still plugged in! Unplug it and let it sit for at least 30 minutes.
ABOUT US:
We are NOT a salvage yard. We are NOT affiliated with a salvage yard. We don't have the typical auto parts mentality. We specialize in one thing: factory audio/video. We are very picky and strive to provide items we would be proud to have in our own vehicles. When you buy an item from us, it is guaranteed to work. Occasionally problems arise with electronics. However, please be assured we never knowingly send out a defective item. It is not in our best interest to send out defective items because we waste time and money replacing them under our warranty. We aim to keep our returns low and our customer satisfaction high. Please give us a chance to add you to our long list of satisfied customers.
SHIPPING & HANDLING
Shipping cost is based on weight and zip code. This site does the figuring, not us. If you feel their calculation is high, you might be underestimating the package weight and/or current shipping costs from our zip code (62401) to yours. Please don't ding us for shipping in the ratings, as we have no control over ever-increasing carrier rates.
We will enter a tracking number into your order details here on the site. They will email it to you if your notification preferences are set correctly.
A signature is not typically required. If you are not home to receive the package, it will most likely be left at your door. Please monitor it's progress and arrange to collect it when it arrives.
This site provides a section/tab in each ad for Shipping information. We encourage you to check that section for prices, methods, time-frames, etc.
